Sell your used Orient shop & restaurant equipment in Islamabad
Who buys used Orient shop & restaurant equipment in Islamabad?
An Orient sells on what it can be shown doing. On a dispenser that means cold water that is genuinely cold, a hot tap that reaches temperature, and the drip tray, bottle seat and — on a bottom-loading model — the pump and hose present. On an air conditioner it means whether it is an inverter unit, and whether the board has ever been changed.
Get your cash offer
Tell us the model and condition, or send photos on WhatsApp instead.
Made or assembled in Pakistan
Spares are widely stocked locally and most technicians in the twin cities have worked on these, so common faults are usually economic to repair.
Orient manufactures locally with dealer coverage in both cities, but the parts a dispenser actually needs — taps, hot tanks, thermostats, thermal cut-outs — come off the shelf at the small workshops that repair dispensers, which is a different counter from an appliance dealer. Inverter boards for its air conditioners are ordered against the model and are the slowest item to arrive.
What your Orient shop & restaurant equipment is worth
Condition decides most of it, but these are the brand-specific things that move an offer up or down.
- A compressor dispenser holds value far better than a thermoelectric one of the same age and badge, because it can be repaired and regassed while the other can only be replaced.
- Completeness decides dispensers: taps, drip tray, bottle seat and, on bottom-loading models, the pump are all matched to the machine, so an incomplete unit sits unsold.
- On inverter air conditioners the value follows the board rather than the compressor, since the board is the model-specific order and everything else is ordinary refrigeration work.
- Wear items for Orient dispensers are common enough that a tired machine is worth restoring, which keeps demand steady even for cosmetically poor units.
When we can only offer parts value
- A sealed refrigeration system that has been opened and re-brazed repeatedly and still will not hold its charge is a parts unit rather than a working chiller.
- Rust that has eaten through a food-contact surface or a chiller's inner liner cannot be cleaned back to a hygienic finish.
- Coolers carrying a beverage company's branding are normally supplied to the shop on loan and remain that company's property, so they cannot be sold on.
- Cracked burner castings or a gas manifold that leaks at the joints make a range unsafe to put back into service as it stands.
What raises the price on any shop & restaurant equipment
Brand aside, these move every offer — the shop & restaurant equipment page has the rest.
- Refrigeration running on its original sealed system is worth far more than a unit whose pipework carries several brazed repair patches.
- Completeness decides a lot, because mixer bowls and hooks, oven trays and racks, fryer baskets and chiller shelves are made for one model and are difficult to replace.
- Gas equipment jetted for the supply it will actually run on places more easily, since a range set up for cylinder LPG needs its jets and regulator changed before it will burn properly on a piped connection.
- Heavier-gauge stainless steel with sound welds and no pitting around sinks and drains holds value that a thin, dented cabinet does not.
- Refrigeration and prep furniture built to standard gastronorm pan sizes takes off-the-shelf inserts and shelving, while a one-off fabricated counter needs every pan and shelf made to fit it.
Selling a Orient shop & restaurant equipment — questions
Why is the water from my used Orient dispenser not properly cold?
Which used Orient equipment makes sense for a shop?
We also buy these shop & restaurant equipment
Looking to buy rather than sell? See what to check on a used Orient shop & restaurant equipment.