Sell your used Canon shop & restaurant equipment in Islamabad
Who buys used Canon shop & restaurant equipment in Islamabad?
A Canon hob or range sells to someone standing in front of it, because there is nothing useful to look up afterwards. Completeness therefore carries the offer: every burner crown and cap present, pan supports matched, ignition firing on each ring, glass unchipped and the plate legible. Note the overall size and cut-out spacing too, since a built-in hob has to drop into a counter that already exists.
Get your cash offer
Tell us the model and condition, or send photos on WhatsApp instead.
Made or assembled in Pakistan
Spares are widely stocked locally and most technicians in the twin cities have worked on these, so common faults are usually economic to repair.
Burners, crowns, caps, electrodes, taps and thermocouples for locally made gas hobs and ranges are stocked across the hardware and gas-appliance market in both cities, and they are sold by size and physical match rather than by part number — which is just as well, since the Canon name cannot be searched usefully. Glass tops and oven doors are the exception: matched by dimension, and often no longer made for older models.
What your Canon shop & restaurant equipment is worth
Condition decides most of it, but these are the brand-specific things that move an offer up or down.
- Because nothing about the appliance can be researched, value is set by what can be inspected on the spot: a complete set of burner crowns and caps, ignition firing on every ring, and unchipped glass.
- Small missing parts cost more than they should, since a replacement has to be matched by hand at the market rather than ordered against a model number.
- The glass top decides value on a hob, because the panel is matched by dimension, older sizes stop appearing, and a cracked top can be worth more to put right than the rest of the appliance.
- A hob in a common size sells faster than an odd one, because the buyer can use the counter aperture they already have.
When we can only offer parts value
- A sealed refrigeration system that has been opened and re-brazed repeatedly and still will not hold its charge is a parts unit rather than a working chiller.
- Rust that has eaten through a food-contact surface or a chiller's inner liner cannot be cleaned back to a hygienic finish.
- Coolers carrying a beverage company's branding are normally supplied to the shop on loan and remain that company's property, so they cannot be sold on.
- Cracked burner castings or a gas manifold that leaks at the joints make a range unsafe to put back into service as it stands.
What raises the price on any shop & restaurant equipment
Brand aside, these move every offer — the shop & restaurant equipment page has the rest.
- Refrigeration running on its original sealed system is worth far more than a unit whose pipework carries several brazed repair patches.
- Completeness decides a lot, because mixer bowls and hooks, oven trays and racks, fryer baskets and chiller shelves are made for one model and are difficult to replace.
- Gas equipment jetted for the supply it will actually run on places more easily, since a range set up for cylinder LPG needs its jets and regulator changed before it will burn properly on a piped connection.
- Heavier-gauge stainless steel with sound welds and no pitting around sinks and drains holds value that a thin, dented cabinet does not.
- Refrigeration and prep furniture built to standard gastronorm pan sizes takes off-the-shelf inserts and shelving, while a one-off fabricated counter needs every pan and shelf made to fit it.
Selling a Canon shop & restaurant equipment — questions
Is the Canon on this hob the camera company?
How do I find parts for a Canon hob with no model number?
We also buy these shop & restaurant equipment
Looking to buy rather than sell? See what to check on a used Canon shop & restaurant equipment.