Sell your used Juki sewing & laundry machine in Islamabad
Who buys used Juki sewing & laundry machines in Islamabad?
What settles a used Juki is what the plate says and how complete the head is. Photograph the full DDL or MO designation, because a buyer works from that: it decides which hook, throat plate and feet fit. For an overlock, say how many threads it is currently set for and whether the loopers, needle plate and matching feet came with it. Have it threaded and stitching before the buyer arrives.
Get your cash offer
Tell us the model and condition, or send photos on WhatsApp instead.
Imported
Parts usually have to be imported or sourced from the grey market, so a repair takes longer and costs more — which matters more on an older unit than the build quality does.
Juki heads are imported, but the wear items — hooks, bobbin cases, feed dogs, throat plates, loopers, overlock knives and belts — are traded loose in Rawalpindi's sewing and machinery markets, because so many machines share the DDL and MO patterns. Genuine Juki-branded spares and unusual attachments are ordered in.
What your Juki sewing & laundry machine is worth
Condition decides most of it, but these are the brand-specific things that move an offer up or down.
- Because so much industrial equipment is built to the DDL and MO patterns, wear parts fit widely, so an imported Juki stays economic to repair where a head with no pattern behind it must have parts sourced singly.
- A legible maker's plate carrying the full designation and serial supports value, because gauge, feed type and every ordered part follow from it; an unreadable plate leaves a fitter matching by eye.
- On an MO overlock, configuration is value: a head that comes with its current needle plate, feet and looper set is ready to work, while one stripped of them needs ordered-in parts before it stitches at all.
When we can only offer parts value
- A seized, heavily pitted race together with a bent needle bar, where the timing cannot be brought back.
- A cracked or previously welded casting in the arm or bed, since the casting is what holds the needle bar and hook in alignment.
- Rust deep enough to pit the hook, needle bar and feed dogs after damp storage, because thread snags however the machine is set up.
- On an electronic domestic machine, a burnt board or motor that is matched to that model and no longer supplied.
What raises the price on any sewing & laundry machine
Brand aside, these move every offer — the sewing & laundry machines page has the rest.
- Completeness carries a lot of it, since the bobbin case, bobbins, presser feet, needle plate, foot pedal, motor belt and cover are model-specific, and a head missing its bobbin case is a harder sell than the same head with one.
- A cast-iron domestic head still sitting in its original treadle stand or wooden cabinet holds value better than a bare head, because the stand is the part the next owner cannot easily source.
- Rust is the main enemy: surface rust on the bed and chrome cleans off, but pitting inside the shuttle race or along the needle bar is structural and shows in every stitch.
- Industrial lock-stitch and overlock heads are judged on the clutch motor and a usable table, because they go to working tailoring setups rather than households.
- A head that has been oiled and run now and then moves more freely than one stored damp for years, and free movement counts for more than worn paint and rubbed decals.
Selling a Juki sewing & laundry machine — questions
What does DDL mean on a used Juki sewing machine?
How do I check a used Juki head is what it is sold as?
We also buy these sewing & laundry machines
Looking to buy rather than sell? See what to check on a used Juki sewing & laundry machine.