Sell your used Super Asia sewing & laundry machine in Islamabad
Who buys used Super Asia sewing & laundry machines in Islamabad?
A Super Asia twin tub or spinner is graded on its body and its tubs, because that is the part that cannot be put right. Fill both tubs, let them stand a few minutes and look underneath for seepage at the drain boss and the tub seam. Then run the wash and spin timers through their range and show the lid brake stopping the spin tub.
Get your cash offer
Tell us the model and condition, or send photos on WhatsApp instead.
Made or assembled in Pakistan
Spares are widely stocked locally and most technicians in the twin cities have worked on these, so common faults are usually economic to repair.
Super Asia is made in Pakistan and its semi-automatic parts — wash and spin timers, drain valves and seals, pulsators, belts and lid brakes — are ordinary counter stock in appliance shops across Islamabad and Rawalpindi, fitted by any general technician rather than by a brand agent.
What your Super Asia sewing & laundry machine is worth
Condition decides most of it, but these are the brand-specific things that move an offer up or down.
- Nothing on a semi-automatic Super Asia is a model-matched electronic part, so a fault is nearly always a counter-bought timer, valve, belt or brake, and these rarely become uneconomic to repair.
- Value sits in the moulding: a cracked tub or a weeping drain boss cannot be repaired reliably, so body condition moves the grade further than anything electrical does.
- A working lid brake matters to buyers who know what they are looking at, because a spinner that will not stop with the lid open is the fault people refuse outright.
When we can only offer parts value
- A seized, heavily pitted race together with a bent needle bar, where the timing cannot be brought back.
- A cracked or previously welded casting in the arm or bed, since the casting is what holds the needle bar and hook in alignment.
- Rust deep enough to pit the hook, needle bar and feed dogs after damp storage, because thread snags however the machine is set up.
- On an electronic domestic machine, a burnt board or motor that is matched to that model and no longer supplied.
What raises the price on any sewing & laundry machine
Brand aside, these move every offer — the sewing & laundry machines page has the rest.
- Completeness carries a lot of it, since the bobbin case, bobbins, presser feet, needle plate, foot pedal, motor belt and cover are model-specific, and a head missing its bobbin case is a harder sell than the same head with one.
- A cast-iron domestic head still sitting in its original treadle stand or wooden cabinet holds value better than a bare head, because the stand is the part the next owner cannot easily source.
- Rust is the main enemy: surface rust on the bed and chrome cleans off, but pitting inside the shuttle race or along the needle bar is structural and shows in every stitch.
- Industrial lock-stitch and overlock heads are judged on the clutch motor and a usable table, because they go to working tailoring setups rather than households.
- A head that has been oiled and run now and then moves more freely than one stored damp for years, and free movement counts for more than worn paint and rubbed decals.
Selling a Super Asia sewing & laundry machine — questions
Is a used Super Asia twin tub worth buying?
Why does my Super Asia spin dryer keep turning after I open the lid?
We also buy these sewing & laundry machines
Looking to buy rather than sell? See what to check on a used Super Asia sewing & laundry machine.