Sell your used Interwood office furniture in Islamabad
Who buys used Interwood office furniture in Islamabad?
Interwood moves fastest as a matched set, because catalogue finishes are revised and a buyer furnishing a room cannot mix two shades. Name the range and finish if you have them, keep the pedestal keys, cam bolts and shelf pins with the piece, and photograph the floor-facing edges, since board swelling moves the grade further than any scratch. Free pickup, cash on collection.
Get your cash offer
Tell us the model and condition, or send photos on WhatsApp instead.
Made or assembled in Pakistan
Spares are widely stocked locally and most technicians in the twin cities have worked on these, so common faults are usually economic to repair.
Interwood manufactures and retails in Pakistan with a showroom presence in Islamabad and an after-sales department, so hardware is matched either through the brand or, more usually, by pattern at Rawalpindi's furniture hardware shops — slides by length and mounting type, hinges by cup size, castors by stem diameter. Panels are the exception: a swollen or chipped board is remade by a carpenter, never ordered as a spare.
What your Interwood office furniture is worth
Condition decides most of it, but these are the brand-specific things that move an offer up or down.
- Because the designs are widely copied, a piece that can be shown genuine by its label and branded hardware places far more easily than an identical-looking one that cannot.
- Office clearances release desks in a single laminate batch, so a matched cluster holds value better than the same desks split up, given that finishes change between ranges.
- Wearing parts — hinges, slides, castors, gas lifts and lock barrels — are matchable by pattern locally, so a fault there costs a grade rather than the piece.
- Swollen board is the hard ceiling, because an engineered panel cannot be dried back and a wet pedestal side has to be remade by a carpenter rather than repaired.
When we can only offer parts value
- A cracked five-star base, or a tilt mechanism that has torn its plate out of the seat pan.
- Melamine desk tops swollen and delaminating along the edge banding, which cannot be cleaned or repaired invisibly.
- Filing cabinets with collapsed drawer runners, or rust through the base panel.
- Mesh backs torn or heavily stretched across the lumbar area, which is not re-tensioned economically on a used chair.
What raises the price on any office furniture
Brand aside, these move every offer — the office furniture page has the rest.
- A steel or aluminium leg frame under the desk, since a metal frame takes being unbolted and re-fitted repeatedly where an all-board desk loses its screw holes the second time.
- Chairs with a gas cylinder that holds, an uncracked five-star base and all five castors present.
- Desks and workstations that knock down flat, since a one-piece executive table has to clear a lift or a stairwell whole.
- Neutral finishes and standard desk sizes, which drop into an existing office instead of forcing the room to be rebuilt around them.
- Filing cabinets and pedestals that still have their keys, and workstation panels that still have their posts, feet and trims.
Selling a Interwood office furniture — questions
How do I tell genuine Interwood from a workshop copy?
Can I add matching Interwood desks later to a used set?
We also buy these office furniture
Looking to buy rather than sell? See what to check on a used Interwood office furniture.