0340 1417862Book Help →
IslamabadSalePurchase logoIslamabadSalePurchase

What affects used sewing & laundry machines prices in Islamabad

How much is a used sewing & laundry machines worth?

What a used sewing & laundry machines fetches in Islamabad and Rawalpindi comes down to condition, completeness and how easily the unit can be serviced — the factors set out below. We have not published a rate table for this category yet, so send photos on WhatsApp for a same-day price range.

We publish rate tables only where the figures have been reviewed, and this category is not there yet. What follows is what actually moves the price — send photos on WhatsApp and you will have a range the same day.

What raises and lowers the price of used sewing & laundry machines

Condition grade is only part of it. These are the specifics that move a quote up or down in this category.

  • Completeness carries a lot of it, since the bobbin case, bobbins, presser feet, needle plate, foot pedal, motor belt and cover are model-specific, and a head missing its bobbin case is a harder sell than the same head with one.
  • A cast-iron domestic head still sitting in its original treadle stand or wooden cabinet holds value better than a bare head, because the stand is the part the next owner cannot easily source.
  • Rust is the main enemy: surface rust on the bed and chrome cleans off, but pitting inside the shuttle race or along the needle bar is structural and shows in every stitch.
  • Industrial lock-stitch and overlock heads are judged on the clutch motor and a usable table, because they go to working tailoring setups rather than households.
  • A head that has been oiled and run now and then moves more freely than one stored damp for years, and free movement counts for more than worn paint and rubbed decals.

When an item is worth parts value only

  • A seized, heavily pitted race together with a bent needle bar, where the timing cannot be brought back.
  • A cracked or previously welded casting in the arm or bed, since the casting is what holds the needle bar and hook in alignment.
  • Rust deep enough to pit the hook, needle bar and feed dogs after damp storage, because thread snags however the machine is set up.
  • On an electronic domestic machine, a burnt board or motor that is matched to that model and no longer supplied.

Brands we see most

These are the sewing & laundry machines brands that come up most often in the Islamabad and Rawalpindi second-hand market. We trade others too — this is what typically turns up, not a list of what is in stock today.

Used sewing & laundry machines — frequently asked questions

Is an old hand-crank or treadle Singer worth selling?

Yes. Those heads are entirely mechanical, parts interchange across many models, and a machine that has been oiled and used is usually straightforward to bring back. What decides it is whether the head turns freely, whether the shuttle race is clean rather than pitted, and whether the stand or cabinet is still with it. A seized head with a rusted race is a parts machine.

Why does my sewing machine keep breaking the thread?

The thread is rarely the cause. Check the needle first: bent, blunt, fitted back to front, or the wrong size for the cloth. Then run a fingernail over the needle plate hole and inside the hook race, because a burr there shaves the thread on every stitch. Lint packed between the tension discs does the same. If a fresh needle and a cleaned race do not fix it, the timing needs a mechanic.

Do you take the sewing machine's table or stand as well?

Yes, and it is worth keeping them together. Treadle irons, wooden cabinets and industrial tables are cut for a particular head, so a head sold on its own leaves the next owner hunting for a fit. The same goes for the foot pedal, motor and belt on an electric machine, so photograph the whole set-up rather than the head alone.

More on sewing & laundry machines

WhatsAppCallBrowse stock